Re: FAS2552 -> FAS8200 migration
I don't know if it really makes it any more or less simple. If you are going to end up with a long term SAS disk footprint, then if it were me, i'd r
View ArticleRe: FAS2552 -> FAS8200 migration
>>>>> "Mike" == Mike Gossett <cmgossett@gmail.com> writes: Mike> I don't know if it really makes it any more or less simple.? If Mike> you are going
View ArticleRE: FAS2552 -> FAS8200 migration
Root-data-(data) partitions are supported only on all-SSD systems; as you have SAS/SATA disks you cannot use them â' at least in supported way. Also
View ArticleUpgraded to 9.1P1 now receiving snapmirror failed emails
Hi All, This is my first post, so please be gentle. Not sure if the screen grabs will work or not and I hope I have removed any IP addresses etc. Bas
View ArticleUpgraded to 9.1P1 now receiving snapmirror failed emails
Hi All, This is my first post, so please be gentle. Not sure if the screen grabs will work or not (resent without screengrabs) and I hope I have remov
View ArticleRe: FAS2552 -> FAS8200 migration
On 29 March 2017 at 08:07, andrei.borzenkov@ts.fujitsu.com < andrei.borzenkov@ts.fujitsu.com> wrote: > Root-data-(data) partitions are supported only
View ArticleRe: FAS2552 -> FAS8200 migration
Hi Chris I suggest you work with your Netapp Partner to arrange for some swing gear if possible. A DS2246 shelf or two will allow you to unpick the
View ArticleRe: FAS2552 -> FAS8200 migration
Just based on what I was told by a NetApp sales rep. Very glad to hear that this is a supported configuration. It had been explained to me ~6-8 mont
View ArticleAW: FAS2552 -> FAS8200 migration
I think this is still true; I donât have the exact details, but you can, of course, add an SSD only aggregate to an existing filer, but you should a
View ArticleRe: FAS2552 -> FAS8200 migration
Just to complete the loop I've just had confirmation direct from Netapp that R-D2 is supported on mixed storage system. The "all-flash" requirement _
View ArticleFranken-Filers: FAS2240-2 to FAS2552, DS4246 to FAS2554
Hi All At the end of a current migration and controller upgrade project I'll have some spare FAS2240-2 arrays (with disks) and a spare DS4246 hybrid
View ArticleRe: Upgraded to 9.1P1 now receiving snapmirror failed emails
I have the same issue, and stopped worrying about it once netapp support showed me the same bug ID. On Wed, Mar 29, 2017 at 9:33 AM, Chris Hague <Chr
View ArticleRe: Upgraded to 9.1P1 now receiving snapmirror failed emails
FYI 9.1P2 was release yesterday and lists this bug as fixedâ¦. http://mysupport.netapp.com/NOW/download/software/ontap/9.1P2/ <http://mysupport.net
View ArticleRe: X1144A - No link
Hey Alexander, Curious if you solved this issue. I'm running into the same thing, but using copper QSFP NetApp cables. I have several FAS9000s with
View ArticleAW: X1144A - No link
Hi Mike, yes, I got it solved and wanted to reply back earlier but somehow always forgot about it :-/ Iâm not really sure what finally was the f
View ArticleRe: X1144A - No link
If I recall, I remember reading when changing the personality of those cards (i.e. 40G to 4x10G or vice-versa), it requires going into maintenance mod
View ArticleRAID Reconstruction after ONTAP upgrade?
Hi, has anyone ever seen a RAID reconstruct happening immediately after an OnTap upgrade? I just upgraded one of my older filers to 8.3.1P2 and it is
View ArticleRE: RAID Reconstruction after ONTAP upgrade?
Hi Alexander, We have seen this on 7-Mode following a cf takeover & giveback. (FAS3250) Same output as you and no disks failed before or after this
View ArticleAW: RAID Reconstruction after ONTAP upgrade?
Did you ever find out the reason for this? Alexander Griesser Head of Systems Operations ANEXIA Internetdienstleistungs GmbH E-Mail: AGriesser@anex
View ArticleRE: RAID Reconstruction after ONTAP upgrade?
NetApp said upgrade the Disk FW and allow an aggr scrub to complete (when we looked at the aggr scrub status -v, some of the scrubs hadn't completed f
View Article