Re: updating disk qual files on many controllers
There is also Windows PowerShell as a scripting option, though myself I prefer SSH. If you have a spare Linux VM around, you might want to look at An
View ArticleRe: updating disk qual files on many controllers
Or use samba to connect to the cifs shares from a linux box.. Chris On 2013/08/05 6:12 PM, Jordan Slingerland wrote: > Yeah, you could do the same b
View ArticleRe: Snapmirror throttle not working
Hi Jeff, I had the same issue with 8.1.2P4. The way I ended up working around the issue was to do the following: 1. Kick off a snapmirror initil
View ArticleRe: Snapmirror throttle not working
Philbert, I'll have to give that a try and verify. I thought I tried that on one, but I don't remember for sure. Thanks for the pointer. Jeff On
View ArticleRe: Snapmirror throttle not working
Hi Jeff, You could also consider filer level throttling ( options replication ) and lock down the overall transfer rate either out or in bound. It'
View ArticleRe: Snapmirror throttle not working
Jeff, No problem. The other neat thing with the snapmirror throttle command is that you can adjust it up or down on the fly. I had a snapmirror i
View ArticleRPC error during ndmpcopy
Greetings, I'm getting the following error when I run a ndmpcopy from one filer to another. Both are 8.1.2P4. Command: ndmpcopy -sa ndmpuser:QIxwK
View Article7.3.4 10gb question
Hey folks, I have a lab box that is a 3020 with 7.3.4.(I know, I should go 7.3.7) and I have an x1005a-r5 (chelsio 10gb) in it. The network config i
View ArticleRe: 7.3.4 10gb question
You sure the Foundry 10G port is told to accept JFs? On Wed, Aug 7, 2013 at 10:31 PM, David Byte <byte@web-host.net> wrote: > Hey folks, I have a l
View ArticleRe: 7.3.4 10gb question
Yep. The 10g port has the jumbo frame Size set to 9200, en jumbo on the port, vlan conf for an ipmtu of 9194. Unless someone who's played with extreme
View ArticleRe: 7.3.4 10gb question
Hi, Are you saying you configured the storage system's 10g interface to work with an MTU of 9200 and the port on the switch to work with a maximum fr
View ArticlevFiler DR and Oncommand Core (DFM)
We've been using vFiler DR for some time now without any issues. Recently we noticed that some of our qtrees on some new vFilers were not being disco
View Articleoptions weirdness
Can someone who knows tell me whats going on here? We recently discovered a security issue with our netapp filers when using NFS. The netapps where a
View ArticleRe: options weirdness
Here's the deal...at least on 7-mode ONTAP (this does not work as well on C-MODE) All normal options are visible all the time. All hidden options are
View ArticleRe: options weirdness
I also take a configuration dump on the Filers before and after Ontap upgrades: config dump BEFORE.TXT config dump AFTER.TXT config compare BEFORE.TX
View ArticleRE: options weirdness
The reason your systems were allowing mounts was likely due to them using NFSv4. However, it's important to note there is a distinction between mount
View ArticleRE: options weirdness
On a side note, this option is set to disabled in clustered Data ONTAP by default. -----Original Message----- From: Parisi, Justin Sent: Monday, Aug
View ArticleRe: options weirdness
On Mon, Aug 12, 2013 at 04:25:45PM +0000, Parisi, Justin wrote: > On a side note, this option is set to disabled in clustered Data ONTAP by default. >
View ArticleRe: options weirdness
As I mentioned in the previous email, I filed a bug to set that option to enabled by default for both modes. However, having it set to disabled doesn
View ArticleRe: options weirdness
On Tue, Aug 13, 2013 at 12:47:14AM +0000, Parisi, Justin wrote: > As I mentioned in the previous email, I filed a bug to set that option to > enabled
View Article